UVMILK® SL Slotted filter for preliminary purification of milk
Catch all large mechanical impurities from your milk and protect dairy equipment from breakdowns by using the most reliable and durable UVMILK® SL Slotted filter made of stainless steel, which prevents mechanical impurities from entering the milking pipes
In stock
- Efficiently filter large mechanical impurities from your milk
Special architecture of filtration slots allows for better retention of large contaminants in milk, such as straw, sawdust and insects. - Prevent breakage of dairy equipment
100 μ filtration cells don’t let solid mechanical particles into the milk line. - Reduce waste
The filter is made of a thick walled stainless steel pipe highly resistant to deformation, corrosion and temperature. It will serve you for years with no consumables needed. - Lower hydraulic resistance and pressure in the system
The milk passes through the filter faster due to an increased ratio of the holes area to the filtering surface. - Optimize your workflow and save time
After milking you only need to flush the filter with reverse water flow, no need to disassemble it. - Increase capacity and improve efficiency of other filters
High dirt holding capacity of UVMILK® SL Slotted filter allows it to retain large mechanical particles that otherwise would clog the next levels of milk filtration.
How it works: The dirty milk is fed through the side inlet pipe into the filter housing. Then under the pump’s pressure it flows through the cartridge from the periphery to the center. Finally, through the outlet in the bottom cap you get clean liquid with no impurities.
The filter is designed as a thick-walled metal pipe made of Italian food grade stainless steel with laser cut holes. The holes are shaped as longitudinal cones, tapering towards the center of the filter, which makes it easy to remove impurities with reverse water flow without leaving any residue. There are practically no dead zones on the surface of the UVMILK® SL Slotted filter, due to which the cartridge has an increased throughput and minimum hydraulic resistance, which increases its capacity several times.
The strength and rigidity of the structure is ensured by the 2 mm thick pipe wall and the staggered arrangement of the holes in the filter. Milk passes freely through the filter cells while large dirt particles are retained.
- Install the filter prior to the receiver jar at a 90 degree angle. The power of the milk pump is usually sufficient to force milk through the UVMILK® Slotted filter.
- Cut the pipe (hose) where you are going to install the housing, and fasten the connection kit with clamps.
- Install the housing into the milking system by connecting the inlet and outlet connections to the caps and to the filter housing.
- Milk enters the filter housing through the side inlet pipe and passes under pressure through the filter cartridge. Pure milk comes out through the outlet in the bottom cap.
! The seals for the clamps must fit exactly into the slots on the housing cap and on the branch pipes, then the housing will be completely sealed
! The filter is installed after the pump
- Use UVMILK® Slotted filter right after milking while milk is warm to prevent dissolution of impurities and large particles getting into the milk line.
- After milking flush UVMILK® Slotted filter cartridge with reverse water flow, no need to disassemble it.
- The seals for the clamps must fit exactly into the slots on the housing cap and on the branch pipes, then the housing will be completely sealed.
- The silicone seals in the housing should be replaced 2 times a year.
- For the most efficient filtration additional filtering levels are recommended after the UVMILK® Slotted filter. See UVMILK® Sock, UVMILK® MAX and UVMILK® ULTRA Active filters for more information.
Reviews
Farm in Bryansk region, 18000 liters of milk per day
We used to have dirt particles clogging the nodes, so there wasn’t enough suction to create a vacuum. We had to stop the system and go through it completely to find the place of blockage. Then we’ve installed UVMILK® SL Slotted Filter, and now it retains large impurities at the pump inlet and doesn’t let them into the system. We finally solved the problem with unscheduled downtime.
Farm in Voronezh region, 15000 liters of milk per day
All our farms are equipped with imported equipment, which is expensive to repair. We have supervisors monitoring the milking hygiene. However, it does happen that dirt particles and insects get into the milk. The slotted filter provides preliminary filtration of milk from all large impurities, increasing the efficiency of equipment and staff.
Farm in Tambov region, 8000 liters of milk per day
After we’ve installed a slotted filter polypropylene filters in front of the tank clog less, which saves on filter replacement. I would also like to note the quality of the filter, its durability. This filter is very sturdy. We happened to drop it several times, but so far it holds up.
Agrofirm in the Republic of Bashkortostan
We’ve been working with UVMILK for about 5 years. We use UVMILK® Max fine filters on each milk line. On manager’s recommendation we’ve also installed a UVMILK® SL Slotted filter for preliminary purification. This filter retains coarse dirt, prevents large particles of fourage and bedding from entering the milk line. As a result, we consistently get premium quality milk. After installing a slotted filter, polypropylene filters in front of the tank get clogged less often, which saves on cartridge replacement. We recommend UVMILK as a reliable partner and supplier of quality products.
Suitable for your production
Топливный фильтр UVPETROL® для топливораздаточной колонки на АЗС
Бесперебойная работа топливораздаточной колонки на АЗС.
UVMilk LLC — we make filters
for food and petrochemical industry