UVMILK® Sock filter 460*60 for rough purification of milk
Clean the milk from small impurities and reduce filtration expenses
In stock
- Filtering large impurities
with numerous fibers keeping large dirt particles on filter surface and inside the filtering layers
- Use filter with the housing that you already have
UVMILK® Sock filter size fits any sock filter housing of any manufacturer
- Save on milk filtering
The filter is quite cheap and is made of high throughput material that will filter declared amount of milk
- Completely avoid filter tears
Our sock filter has no seams and the tip is laser soldered.
- Safe interaction with raw milk
Due to 100% primary PP with no dyes or chemicals that could penetrate into milk
- Reduce milk waste while filter replacement
UVMILK® Sock filters are highly hygroscopic and don’t absorb milk
How it works: To install the filter, place the filter cartridge on the spring, then put it altogether into the housing. The milk is fed into the filter housing through the inlet in the cap and passes through the filter under the pump pressure. Pure milk comes out through a branch pipe in the lower housing cover.
The filtering cartridge looks like a sock with a smoothed surface. The material is rolled through heated rolls and the fibers get sintered to the surface, which eliminates the loss of fibers. The milk flows through the branched channels of the filter cloth, moving evenly over the layers. The seams are laser soldered, which guarantees their strength and tightness, preventing any small mechanical impurities from contaminating the milk.
- Install the filter in the hose after the receiver jar and the pump
- Cut the hose where you are going to install the housing, and fasten the connection kit with clamps
- Install the housing into the milking system by connecting the inlet and outlet connections to the caps and to the filter housing
- To install the filter into housing you need to put filter cartridge on the spring inside the housing
- Milk enters the filter housing through the top inlet pipe in the housing cap and passes under pressure through the filter cartridge. Pure milk comes out through the outlet in the bottom cap
- Use UVMILK® Sock filters right after milking while milk is warm to prevent dissolution of impurities.
- WARNING: The spring must be screwed in straight to avoid filter tearing. Do not tilt the filter while fixing.
- To avoid hydraulic impact, after you install the filter first open the “ВХОД” (input), and then, when the housing fills up with milk, gradually open the “ВЫХОД” (output).
- One filtering sock should be used for one milking only.
- After the declared amount of milk passes through the filter or after you finish milking, remove the replaceable filtering sock and dispose it together with other solid waste.
- The system should be washed after each milking and a new filtering sock should be installed for the next milking to prevent bacterial growth and milk going sour.
- To make the UVMILK® Sock filter work more efficiently an additional level of filtration is recommended prior to it. See UVMILK® SL Mesh filter for more information.
Reviews
Suitable for your production
Топливный фильтр UVPETROL® для резервуара и котельной
Очистка от осадка после длительного хранения.
UVMilk LLC — we make filters
for food and petrochemical industry