Oil filter UVOil® housing
Article:
0 pieces/pack.
In stock
Delivery
Housing material
Food grade steel AISI 304
Wall thickness
3 mm
Connection type
clamp
Seals
EPDM in accordance with FDA 117.2600
Housing internal angles
>90°
Internal surface roughness
Ra≤ 0,8 µm
External surface
Mirror polish
Branch pipe
50
Fitting type
Welding, DIN, SMS, clamp
- Reliability and durability
due to stainless steel housing, resistant to deformation and corrosion. Special silicon seals prevent oil leaks - Ease of use
no special equipment required for installation. Clamp fastenings make it easy to install to any production chain section. - Easy to rinse
thanks to mirror polish and obtuse angles of the pipes that don’t let the dirt stay in housing - Quality housing production
on computerized CNC machines. No external welds on housing and the internal seams are ground to ensure no leaks
Housing material
Food grade steel AISI 304
Wall thickness
3 mm
Connection type
clamp
Seals
EPDM in accordance with FDA 117.2600
Housing internal angles
>90°
Internal surface roughness
Ra≤ 0,8 µm
External surface
Mirror polish
Branch pipe
50
Fitting type
Welding, DIN, SMS, clamp
- Cut the pipe (hose) where you are going to install the housing, and fasten the connection kit with clamps or weld it.
- Install the housing into the system by connecting the inlet and outlet connections to the caps and to the filter housing.
- Liquid enters the filter housing through the side inlet pipe and passes under pressure through the filter cartridge. Pure oil comes out through the outlet in the bottom cap.
! The seals for the clamps must fit exactly into the slots on the housing cap and on the branch pipes, then the housing will be completely sealed
! The filter is installed after the pump
- UVMILK® filter housing is installed after the pump. Pressure allowed is 1,5 - 10 atm.
- To avoid hydraulic impact, after you install the filter first open the "ВХОД" (inlet), and then, when the housing fills up with milk, gradually open the "ВЫХОД" (outlet).
- No need to reassemble housing to wash it.
- The silicone seals in the housing should be replaced 2 times a year.
- The seals for the clamps must fit exactly into the slots on the housing cap and on the branch pipes, then the housing will be completely sealed.
- For efficient and long housing operation grease the clamps screw-threads with food grade lubricants
Reviews
UVMilk LLC — we make filters
for food and petrochemical industry