Top.Mail.Ru

UVMILK® Mini filter housing for fine purification of milk

Article:
Filter element Filter housing Housing fastenings
0 pieces/pack.

In stock

Delivery
Доставка
Housing material
Food grade steel AISI 304
Wall thickness
3 mm
Connection type
clamp
Seals
EPDM in accordance with FDA 117.2600
Housing internal angles
>90°
Internal surface roughness
Ra≤ 0,8 µm
External surface
Mirror polish
Fitting type
Welding, DIN, SMS, clamp
  • Resistant to corrosion, chemicals, mechanical stress and high temperatures thanks to 3 mm thick Italian stainless steel.
  • The cap connects to the body with a clamp which doesn’t have thread grooves where dirt and bacteria can remain even after rinsing.
  • Easy to rinse thanks to obtuse angles of the pipes and mirror polish.
  • Quick installation and disassembly of the case thanks to clamp connections that can be disassembled in a minute.
  • Silicone seals prevent fluid leakage and make the housing completely tight.
  • Suitable for any equipment thanks to standard mountings

How it works: The dirty milk is fed through the side inlet pipe into the filter housing. Then under the pump’s pressure it flows through the cartridge from the periphery to the center. Finally, through the outlet in the bottom cap you get clear liquid with no impurities.

Housing material
Food grade steel AISI 304
Wall thickness
3 mm
Connection type
clamp
Seals
EPDM in accordance with FDA 117.2600
Housing internal angles
>90°
Internal surface roughness
Ra≤ 0,8 µm
External surface
Mirror polish
Fitting type
Welding, DIN, SMS, clamp
  • Install the filter to the milk line at a 90 degree angle.
  • Cut the pipe (hose) where you are going to install the housing, and fasten the connection kit with clamps or weld it.
  • Install the housing into the milking system by connecting the inlet and outlet connections to the caps and to the filter housing.
  • Milk enters the filter housing through the side inlet pipe and passes under pressure through the filter cartridge. Pure milk comes out through the outlet in the bottom cap.

! The seals for the clamps must fit exactly into the slots on the housing cap and on the branch pipes, then the housing will be completely sealed

! The filter is installed after the pump

 

  • To avoid hydraulic impact, after you install the filter first open the "ВХОД" (inlet), and then, when the housing fills up with milk, gradually open the "ВЫХОД" (outlet).
  • The seals for the clamps must fit exactly into the slots on the housing cap and on the branch pipes, then the housing will be completely sealed.
  • The silicone seals in the housing should be replaced 2 times a year.

Reviews

Farm in Voronezh region

We always use high efficiency UVMILK® Standard filters on our farm and we are happy with their simplicity. Now we always get top grade milk (from 1st grade) with low bacterial cell count. UVMILK® Standard filters all mechanical impurities, they don’t delaminate or crumble. We didn’t have a single quality claim about UVMILK products or the company.

Farm in Voronezh region

Farm in Leningrad region

I do animal breeding for over 20 years. We used UVMILK filters on another farm before. On this farm we used to purchase filters from a different supplier, the filters were of some strange lilac color and could crumble even before installation. We were facing delivery problems all the time. After we got UVMILK offer, we were surprised of such fast delivery. Our milk now is top-quality, appropriate for baby nutrition.

Farm in Leningrad region

Farm in Moscow region

We installed UVMilk filters after the diary plant we cooperate with required to low down bacterial cell count in our milk. The filters work perfectly.

Farm in Moscow region

UVMilk LLC — we make filters
for food and petrochemical industry

Address

Get directions