UVMILK® SL Perforated filter for preliminary purification of milk
Clear your milk from large mechanical impurities and save your money with the solid stainless steel filter which provides increased throughput with 500 μm cell
In stock
- Efficiently filter large mechanical impurities from your milk
with a stable milk flow and 500 μm filtering cell - Reduce milk waste
thanks to filter sealed construction with silicon seals and clamp connections - Optimize your workflow and save time
After milking you only need to flush the filter with reverse water flow, no need to disassemble it. - No extra expenses thanks to filter operation without electricity and filtering cartridge reusability
How it works: The dirty milk is fed through the side inlet pipe into the filter housing which looks like a thick-walled perforated metal pipe made of Italian food grade stainless steel. Stable milk flow and system pressure are provided by the filter mirror polishing which makes filtering highly efficient.
The holes are made chequerwise. The optimal distance between them ensures the rigidity of the structure. Under the pump’s pressure milk passes freely through the filter cells while large dirt particles are retained. Through the outlet in the bottom cap you get clear milk with no impurities
- Install the filter to the milk line at a 90 degree angle.
- Cut the pipe (hose) where you are going to install the housing, and fasten the connection kit with clamps or weld it.
- Install the housing into the milking system by connecting the inlet and outlet connections to the caps and to the filter housing.
- Milk enters the filter housing through the side inlet pipe and passes under pressure through the filter cartridge. Pure milk comes out through the outlet in the bottom cap.
! The seals for the clamps must fit exactly into the slots on the housing cap and on the branch pipes, then the housing will be completely sealed
! The filter is installed after the pump
- Use UVMILK® SL Perforated filter while milking when milk is warm to prevent dissolution of impurities and large particles getting into milk line.
- To avoid hydraulic impact, after you install the filter first open the "ВХОД" (inlet), and then, when the housing fills up with milk, gradually open the "ВЫХОД" (outlet).
- The silicone seals in the housing should be replaced 2 times a year.
- The seals for the clamps must fit exactly into the slots on the housing cap and on the branch pipes, then the housing will be completely sealed.
- After milking flush UVMILK® SL Perforated filter cartridge with reverse sanitizing water flow, no need to disassemble it.
- For the most efficient filtration complete your milk line with 4 filtering levels with UVMILK® Moby filter, highly efficient UVMILK® Mini filter and UVMILK® ULTRA Economic.
Reviews
Farm in Chuvashia, 2700 liters of milk per day
Previously we used more PP filters in summer due to increased milk yield and dirt that cows bring from pasture because of weather conditions. We’ve installed a perforated UVMILK® filter to pre-filter milk from coarse dirt, and this investment paid off in a few months. We do not remove the filter during winter months, we continue to use it, especially since milking does not have to be stopped to flush the filter.
Farm in Kaluga region, up to 3000 liters of milk per day
We’ve installed a UVMILK® perforated filter to reduce the load on the cream separator. For two years now we were able to last from one scheduled maintenance to another without serious breakdowns.
Farm in the Stavropol Territory, 1500 liters of milk per day
We’ve fought against bacterial contamination and acidity in milk for a long time. The main cause was the dirt that got into the milk during milking. The stainless steel filter has helped to reduce the bacterial content of the milk. The smell of milk has noticeably improved, the gray color is gone.
Suitable for your production
Топливный фильтр UVPETROL® для бензовоза
Своевременное выполнение графика посевных, заготовительных и уборочных работ.
UVMilk LLC — we make filters
for food and petrochemical industry