UVMILK® Moby mobile filter housing for rough purification of milk
In stock
- Resistant to corrosion, chemicals, mechanical stress and high temperatures thanks to 3 mm thick Italian stainless steel.
- The cap connects to the body with a clamp which doesn’t have thread grooves where dirt and bacteria can remain even after rinsing.
- Easy to rinse thanks to obtuse angles of the pipes and mirror polish.
- Quick installation and disassembly of the case thanks to clamp connections that can be disassembled in a minute.
- Silicone seals prevent fluid leakage and make the housing completely tight.
- Suitable for any equipment thanks to standard mountings
How it works: The dirty milk is fed through the side inlet pipe into the filter housing. Then under the pump’s pressure it flows through the cartridge from the center to the periphery. After filtering you get clear liquid with no impurities.
- Install the filter on the hose after the pump
- Insert the filter element into the fixing place and fasten the cover with the screw
- Install the housing into the milking system by connecting the inlet and outlet connections to the appropriate couplings
- Milk enters the filter housing through the inlet pipe and passes under pressure through the filter cartridge.
! The seals for the clamps must fit exactly into the slots on the housing cap and on the branch pipes, then the housing will be completely sealed
! The filter is installed after the pump
- To avoid hydraulic impact, after you install the filter first open the "ВХОД" (inlet), and then, when the housing fills up with milk, gradually open the "ВЫХОД" (outlet).
- The seals for the clamps must fit exactly into the slots on the housing cap and on the branch pipes, then the housing will be completely sealed.
- The silicone seals in the housing should be replaced 2 times a year.
Reviews
UVMilk LLC — we make filters
for food and petrochemical industry