UVMILK® ULTRA Practic filter housing for ultra-fine purification of milk
In stock
- Resistant to corrosion, chemicals, mechanical stress and high temperatures
thanks to 3 mm thick Italian stainless steel - Clean and efficient
The cap connects to the body with a clamp, which doesn’t have thread grooves where dirt and bacteria can remain even after rinsing - Easy to rinse
thanks to obtuse angles of the pipes and mirror polish - Quick installation and disassembly
thanks to clamp connections that can be disassembled in a minute - Completely tight
thanks to silicone seals that prevent fluid leakage - Suitable for any equipment
thanks to standard mountings
How it works: Under pressure dirty liquid enters the filter housing through the side connection and is distributed over the surface of the cartridge. Filtration is carried out from the inner layers to the outer ones. You receive the purified liquid from the branch pipe in the lower cap of the housing.
- The filter is most efficient during milking when installed prior to the cooling tank
- Install the filter in a straight section of the milk pipe near the cooling tank
- Cut the pipe (hose) where you are going to install the housing, and weld or fasten the connection kit with clamps
- Install the housing into the milking system by connecting the inlet and outlet connections to the appropriate fittings
- Milk enters the filter housing through the inlet in the bottom cap and passes under pressure through the filter element. Pure milk comes out through a branch pipe in the side of the housing.
! The seals for the clamps must fit exactly into the slots on the housing cap and on the branch pipes, then the housing will be completely sealed
! The filter is installed after the pump
- To avoid hydraulic impact, after you install the filter first open the “ВХОД” (inlet), and then, when the housing fills up with milk, gradually open the “ВЫХОД” (outlet).
- The seals for the clamps must fit exactly into the slots on the housing cap and on the branch pipes, then the housing will be completely sealed.
- The silicone seals in the housing should be replaced 2 times a year.
Reviews
Farm in Tver region
This year we decided to improve the quality of our milk. To achieve that the equipment was modernized and serious work was done to improve the milking process. We were aiming for the highest grade milk, but SCC was the biggest hurdle. Our somatic cell count could reach 600 000 per 1 cm3. We’ve installed UVMILK® filters at different places: ULTRA on each milk line, and one more after the bulk tank. As a result we’ve got the highest grade milk with stable testing results, and most importantly, increased profitability of milk production.
Farm in Sverdlovsk region
...Our farm is rather advanced. We have several milk lines and previously we used several sock filters installed in a row before the bulk tank on warm milk. Sometimes those filters would get clogged, there were spikes in bacterial contamination, high SCC, traces of antibiotics in milk, and of course human error. Usually we’d sell our milk as highest grade, but sometimes as first grade because of the human error, again. With our daily volume that’s a big loss of money. We tried UVMILK® filters on one farm first and saw the results right away, that’s why we decided to try not only sleeve filters, but also the new ULTRA filters to clean warm milk before it gets to the bulk tank. Now we sell our milk to milk plants that make premium quality products, like Danon, and they don’t buy milk that is not up to their standards.
Dairy farm in Voronezh region
... We’ve installed ULTRA filters in the milk line, and now it’s been a year since we’ve started processing our milk ourselves. We now sell packaged milk, kefir, sour cream.
UVMilk LLC — we make filters
for food and petrochemical industry