Top.Mail.Ru

UVMILK® ULTRA 90 dairy filter

Article:

Get clean milk without sediment and unwanted impurities, as well as prevent package bloating and increase the shelf life of finished products by using UVMILK® ULTRA 90 dairy filter for ultra-fine purification of milk at the packaging stage, which cleans out all the smallest impurities that get into milk during production process of raw or dry milk

16 pieces/pack.

In stock

Delivery
Доставка
Filter material
Polypropylene PP H030
Filtration cells
3 μm
Capacity
90 000 liters
Size
600 х 110 х 50 mm
Pressure
Optimal: 2.5-6 atm; Min: 1.5 atm; Max: 10 atm
Filter resistance
0,2 – 0,5 atm
Max temperature
130°
  • Increased filtering resource which can clear up to 90000 liters without replacing 
    thanks to optimal ratio of filter layers and filter size, combining resource intensity and filtration fineness 
  • No sediment in milk before packing
    thanks to 3 micron filter working as control one
  • Assurance in filtration quality with minimal cost
    thanks to additional cleaning and big resource intensity of the filter that is able to withstand a long service life 
  • Homogeneous whole packaged milk with adjusted fat content and smooth structure
    thanks to a porous filter that removes impurities and works as a homogenizer 
  • Long storage period and no retail returns 
    due to clearing from even minor impurities, which prevents bacterial cell count increase in packed product
  • Maintaining reputation of top-quality milk products supplier
    thanks to UVMILK® ULTRA 90 filter for packaging stage, excluding possibility of contamination from filling line into the finished milk 

How it works: Use UVMILK® ULTRA 90 filter before bottling line to clear the finished product from unwanted impurities that get inside while production. The dirty milk is fed into the filter housing through the bottom pipe and under the pump’s pressure it flows through the cartridge from the center to the periphery. You get the clear finished product through the outlet in the side pipe.  

Filtering layers are arranged using a unique patented technology SomaticStop. Multilayer cylindrical channels of the filter element are formed by discrete layers of fibers, obtained by the aerodynamic extrusion of food grade polypropylene, smoothly merging into each other. The smooth transition between the layers reduces gaps in the flow and the hydraulic resistance of the filter element, increasing its throughput. Microvilli of polypropylene are angled to the fibers in such a way that impurities and somatic cells get stuck in them and fat globules, having the ability to shrink and stretch, pass through the smallest channels of the filtering element without getting caught in it.

Filter material
Polypropylene PP H030
Filtration cells
3 μm
Capacity
90 000 liters
Size
600 х 110 х 50 mm
Pressure
Optimal: 2.5-6 atm; Min: 1.5 atm; Max: 10 atm
Filter resistance
0,2 – 0,5 atm
Max temperature
130°
  • Cut the pipe (hose) where you are going to install the housing, and weld or fasten the connection kit with clamps
  • Install the housing into the milking system by connecting the inlet and outlet connections to the appropriate fittings
  • Milk enters the filter housing through the inlet in the bottom cap and passes under pressure through the filter element. Pure milk comes out through a branch pipe in the side of the housing

! The seals for the clamps must fit exactly into the slots on the housing cap and on the branch pipes, then the housing will be completely sealed

! The filter is installed after the pump

 

  • Use UVMILK® ULTRA 90 filter before bottling line to clear the finished product from unwanted impurities that get inside while production
  • To avoid hydraulic impact, after you install the filter first open the «ВХОД» (inlet), and then, when the housing fills up with milk, gradually open the «ВЫХОД» (outlet) 
  • After the declared amount of milk passes through the filter or after you finish filtering, remove the replaceable cartridge and dispose of it together with other solid waste
  • After milking flush UVMILK® ULTRA 90 housing with sanitizing water flow, no need to disassemble it
  • One filter cartridge should be used for one filtering only
  • The silicone seals in the housing should be replaced 2 times a year
  • The seals for the clamps must fit exactly into the slots on the housing cap and on the branch pipes, then the housing will be completely sealed

Reviews

UVMilk LLC — we make filters
for food and petrochemical industry

Address

Get directions