Top.Mail.Ru

UVMILK® ULTRA 40 dairy filter

Article:

Get clean, ready-made canned milk and ice cream without unwanted impurities with UVMILK® ULTRA 40 dairy filter, which cleans all the smallest dirt and lumps after reconstitution of milk powder

30 pieces/pack.

In stock

Delivery
Доставка
Filter material
Polypropylene PP H030
Filtration cells
3 μm
Capacity
40 000 liters
Size
270 х 90 х 38 mm
Pressure
Optimal: 2.5-6 atm; Min: 1.5 atm; Max: 10 atm
Filter resistance
0,2 – 0,5 atm
Max temperature
130°
  • Whole milk products with no sediment and lumps
    thanks to multilayer filter which holds undissolved particles, bags threads, insects, etc. 
  • Homogeneous consistency of reconstituted milk powder
    thanks to the porous filter structure, which works as a homogenizer 
  • SSC reduce
    due to our patented SomaticStop techology and 3 μm filtering cell
  • Bacterial cell count reduce in reconstituted milk
    thanks to ultra-fine filtering from all impurities that lead to bacterial grow
  • Preservation fat content, density and protein in reconstituted milk powder 
    due to variable filter winding that does not retain elastic fat globules and protein cells 
  • Maintaining reputation of top-quality milk products supplier 
    thanks to UVMILK® ULTRA 40 filter excluding possibility of reconstituted milk contamination with burns after drying  

How it works: Use UVMILK® ULTRA 40 dairy filter before bottling line to clear the finished product from unwanted impurities that get inside while production. 

Filter looks like a tube with a replaceable cartridge. The finished product is fed into the filter housing through the bottom pipe and under the pump’s pressure it flows through the cartridge from the center to the periphery. You get the clear finished product through the outlet in the side pipe.   

Thanks to special production technology, large contamination retain in the inner layers of the cartridge, and small particles are hold by outer layers, which prevents sediment in the finished product. The filter layers are multilayer cylindrical channels formed by discrete layers of fibers smoothly merging into each other, obtained by the method of aerodynamic extrusion of food grade polypropylene. Due to this, the filter has increased throughput and minimum hydraulic resistance, which significantly increases its resource. At the end of the filtration, rinse UVMILK® ULTRA 40 filter housing with a stream of washing liquid, no need to disassemble.

Filter material
Polypropylene PP H030
Filtration cells
3 μm
Capacity
40 000 liters
Size
270 х 90 х 38 mm
Pressure
Optimal: 2.5-6 atm; Min: 1.5 atm; Max: 10 atm
Filter resistance
0,2 – 0,5 atm
Max temperature
130°
  • Cut the pipe (hose) where you are going to install the housing, and weld or fasten the connection kit with clamps
  • Install the housing into the milking system by connecting the inlet and outlet connections to the appropriate fittings
  • Milk enters the filter housing through the inlet in the bottom cap and passes under pressure through the filter element. Pure milk comes out through a branch pipe in the side of the housing

! The seals for the clamps must fit exactly into the slots on the housing cap and on the branch pipes, then the housing will be completely sealed

! The filter is installed after the pump

 

  • Use UVMILK® ULTRA 40 filter before bottling line to clear the finished product from unwanted impurities that get inside while production
  • To avoid hydraulic impact, after you install the filter first open the «ВХОД» (inlet), and then, when the housing fills up with milk, gradually open the «ВЫХОД» (outlet) 
  • After the declared amount of milk passes through the filter or after you finish filtering, remove the replaceable cartridge and dispose of it together with other solid waste
  • After milking flush UVMILK® ULTRA 40 housing with sanitizing water flow, no need to disassemble it
  • One filter cartridge should be used for one filtering only
  • The silicone seals in the housing should be replaced 2 times a year
  • The seals for the clamps must fit exactly into the slots on the housing cap and on the branch pipes, then the housing will be completely sealed

Reviews

UVMilk LLC — we make filters
for food and petrochemical industry

Address

Get directions