UVMILK milk filters for farms
The stable positive dynamics of milk production in recent years is characteristic not only for Russia, but also for the world market as a whole. The introduction of modern milking systems, the modernization of livestock complexes, the construction of robotic farms, the use of energy-saving technologies, selection and breeding work and the improvement of the forage base allow obtaining high milk yields.
Problems with milk filters from other manufacturers
- Filter winding technology does not reduce the level of somatic cells
- Unstable milk grade due to the breakthrough of QMAFAnM indicators
- Dyes, glue and questionable additives from filters get into milk
- Ruptures of stocking filters and the need for re-cleaning of milk
- Delamination and ingress of filter fragments during operation
- Overgrowth with milk stone and breakdown of threaded connections of housings
- Low price for commercial milk from dairy plants due to poor quality indicators
- If filters are not replaced in a timely manner, they become a source of milk contamination
Advantages of UVMILK filters for farms
- Patented filter winding technology with a filtration fineness of 5 and 3 microns
- Special filter structure that allows fat globules to pass through without crushing
- Safe composition without dyes, glue and other chemical additives
- Strength of filters that prevent rupture and re-contamination of milk
- Exact fit of filter sizes for hermetically sealed installation in the housing
- The highest mechanical cleaning possible today
- A wide range of filters with a resource from 500 liters to 500 tons
- Clamp connections for easy assembly of housings during installation and operation
Benefits of using UVMILK filters for farms
- Increasing the grade of commercial milk
- Additional profit due to an increase in the purchase price from the dairy
- Increasing the shelf life of milk
- Maximum reduction of somatic cells
- Guaranteed safe use on fresh and chilled milk
- Preservation of milk fat content
- Non-stop milking while maintaining filtration efficiency
- Staff performance indicator
Extrusion production
UVMILK milk filters are manufactured using aerodynamic extrusion on machines that are independently assembled and modified by the company’s designers. In the process of inventing filters, the equipment went through several stages of improving design and functionality. We continue to develop innovative extrusion production technologies. The introduction of channels into the design of the polypropylene cartridge, in which there was a smooth transition from a large cross-section to a smaller one, made it possible to increase the level of milk purification, first to 5 microns, and then to 3 microns.
Read more about our extrusion productionUVMILK range of milk filters for farms
Personal subsidiary farms less than 0.5 tons of milk
Farms from 0.5 to 7 tons
Agroholding more than 7 tons of milk
Housings
1st level of filtration
preliminary cleaning
removal of large dirt
preliminary cleaning
removal of large dirt
Steel filters for milk
for collecting milk in a can
for pump protection
for milk receiver
for preliminary cleaning
1st level of filtration
preliminary cleaning
removal of large dirt
preliminary cleaning
removal of large dirt
2nd level of filtration
Coarse cleaning
removal of small dirt
Coarse cleaning
removal of small dirt
Thermally bonded filters for milk
for cleaning from insects and hair
for cleaning particles of litter
for cleaning from particles of manure
housing
2nd level of filtration
Coarse cleaning
removal of small dirt
Coarse cleaning
removal of small dirt
3 level of filtration
Fine cleaning
reduction of bacterial contamination
Fine cleaning
reduction of bacterial contamination
Highly efficient milk filters
for small volumes of milk
for medium volumes of milk
for large volumes of milk
housing
3 level of filtration
Fine cleaning
reduction of bacterial contamination
Fine cleaning
reduction of bacterial contamination
4 level of filtration
Ultrafine cleaning
reduction of somatics
Ultrafine cleaning
reduction of somatics
Ultrafilters for milk
for preparing milk for transportation
for increasing the shelf life of milk
for reducing somatics and sediment
housing
4 level of filtration
Ultrafine cleaning
reduction of somatics
Ultrafine cleaning
reduction of somatics
Steel filters for preliminary purification of milk
UVMILK steel pre-filters clean milk from large mechanical impurities larger than 50 microns, such as straw, sawdust, insects, due to the lattice structure through which milk passes freely, and large impurities are retained. Using UVMILK steel filters allows dairy producers to save money due to the reusability and durability of a stainless steel filter.
Thermally bonded filters for rough purification of milk
Thermally bonded UVMILK coarse filters allow you to obtain high-quality milk that is free of impurities larger than 10 microns, such as dust, manure and feed particles. In many households, these filters are the first stage of cleaning and must withstand a significant load. To increase strength, we use ultrasonic soldering, which eliminates the possibility of the filter rupturing at the seams and dirt particles re-entering the milk.
High efficiency UVMILK filters for fine purification of milk
Extruded highly efficient filters UVMILK for fine purification increase the grade of milk and allow you to receive an additional payment from the dairy plant by reducing bacterial contamination and acidity due to the filter design: the filter consists of 100 or more layers with a mesh size of 5 microns. UVMILK filter elements are made of food-grade polypropylene without dyes and chemical impurities, which ensures the preservation of the taste and organoleptic properties of milk.
- Milk filter for fine purification
UVMILK ultrafilters for ultrafine purification of milk
Extrusion ultrafilters UVMILK ultrafine cleaning contribute to obtaining premium and extra grade milk, increasing profits and cost-effectiveness of milk production due to the maximum reduction of somatic cells due to the patented SomaticStop technology and filtration fineness of 3 microns. Today, this is the highest possible degree of purification, which allows obtaining milk of a consistently premium or extra grade and ensuring optimal technological properties of milk during processing.
- Ultrafine milk filters
Characteristics of UVMILK milk filters
Assembly of UVMILK milk filter
- Attach the filter element to the seat of the bottom cover.
- Place the silicone seal exactly into the groove of the lid.
- Connect the housing to the bottom cover with a clamp.
- Place the silicone seal along the top edge of the housing.
- Close the filter cover and secure it with a clamp.
- To connect to the line, use mating parts.
Economic justification
A dairy farm produces about 7,000 liters of milk per day. If the udder preparation rules were not followed before milking and the first streams of milk were not milked manually for inspection, then milk with mastitis products also gets into the total volume. As a result, due to high QMAFAnM and somatic cell counts, the milk corresponds to the first grade and is sold at a price of 0.3 instead of 0.33 € per liter. Lost profit of 7,000 liters X 0.03 € = 210 € per day or 6,300 € per month.
The use of UVMILK ULTRA Practic milk filters will effectively remove small mechanical impurities in the form of particles of keratinized epithelium, manure and clots of somatic cells. As a result, the quality of milk increases, as does its purchase price. By investing about €90 per month in filtration, you can ensure additional hygiene control during milking and receive an additional profit of 6,300 € per day. Payback period for filters: 1 day.
